Battery Testing Equipment

Conventional battery test methods measure the stored energy through a full discharge. This procedure is time-consuming and stresses the battery. There is a move towards methods that take only seconds instead of hours; however, rapid testing provides only estimated state-of-health values, and the accuracies vary according to the method used. Public safety, medical and defense organizations still depend on tests involving periodic full discharge/charge cycles.

Battery Analyzer

Battery analyzers became popular in the 1980s and 1990s to restore nickel-cadmium batteries affected by “memory,” as well as to prolong battery life as part of maintenance. The Cadex C7000 Series serves the industry well and set new standards for what a battery analyzer could do. These workhorses accommodate lead-, nickel- and lithium-based batteries, and operate stand-alone or with a PC. Figure 1 illustrates a C7400 battery analyzer servicing a variety of batteries in configured adapters that set the analyzer to the correct setting. Each of the four independent stations allows unique service programs.

Cadex C7400 battery analyzer


Figure 1:
Cadex C7400 battery analyzer

Two- and four-station analyzers service batteries from 1.2 to 15V, programmable up to 4A per station. The extended version goes to 36V and 6A charge and discharge currents. The service programs include QuickSort™ for rapid-test
of Li-ion batteries.

Courtesy of Cadex

Connecting various shapes and forms of batteries has always been a challenge, and technicians have invented unique contraptions with springs and levers so complicated that only the inventor dares to touch. There is no simple way to connect batteries, especially when dealing with small packs that have tiny surface contacts.

Cadex solved the battery interface challenge with custom adapters for common batteries and universal adapters for specialty packs. The custom adapters are easiest to use; they are specially designed and the batteries go in only one way. The adapters are smart and are able to hold configuration codes for up to 10 different battery types. This allows the servicing of batteries with identical footprints but different electrical values. The user can edit the parameters with the menu function on the analyzer or with the PC.

The universal adapters consist of user-programmable Smart Cables that accommodate virtually any battery type. With the proliferation of cellular batteries and the need for a quick and simple battery interchange, Cadex developed the RigidArm™(Figure 2). This adapter features spring-loaded arms that meet the battery contacts from the top down and apply correct pressure to the contacts. Lockable mechanisms allow quick and repetitive testing of same-type batteries. The retractable floor holds the battery in a vertical position, and magnetic guides keep the battery in place if laid horizontally. For added safety, a temperature sensor monitors the battery during the test.

RigidArmâ„¢ for cellular batteries


Figure 2: RigidArm™ for cellular batteries

The universal adapter simplifies the interface with small batteries. The adapter holds 10 of the most commonly used mAh ratings and is compatible with Cadex battery analyzers.

Courtesy of Cadex


Servicing Cellular Batteries

Advancements made in battery test equipment make it feasible to service the over four billion cellular batteries in global use at storefronts while the customer waits. Hooking up the battery still needs some skill, and once the contacts are established the service technician may need to enter the capacity in mAh and other battery specifications.

Most cellular batteries have three or four contacts. The positive [+] terminal is normally at the outer edge and the negative [–] one is positioned towards the inside. The third contact is the thermistor measuring the battery temperature, and unless the battery adapter is specially made for the battery type, the thermistor is normally not hooked up for the test; a universal adapter often has its own temperature protection. The fourth contact, if available, may offer code identification for configuration. Figure 3 illustrates a typical contact positioning.

Typical contacts on a cellular battery

Figure 3:
Typical contacts on a cellular battery

The positive [+] is normally at the outer right and the negative [–] is on the inside. Most batteries have a thermistor; some also offer a code.

Returned batteries are either discarded or shipped to service centers where they are tested and redistributed as Class B packs. Looking closer at the tonnage of these returned batteries reveals that nine out of 10 packs have no problem and can be serviced. Seeing an opportunity for business, large refurbishing centers have sprung up in the USA that test 400,000 batteries per month, with volumes anticipated to increase to one million per month.

Storefront testing reduces waste, and the motto goes: “To the storefront and no further.” Battery analyzers featuring rapid-test programs are offered that give a clear assessment of a battery in a few seconds while the customer waits. Figure 4 illustrates a service concept for storefront testing while the customer waits. If the battery needs charging or has a genuine fault, an alternate pack is given from the pool of previously tested batteries.

Storefront service


Figure 4:
Storefront service

Batteries are serviced while the customer waits. A faulty pack is replaced from the pool of previously serviced batteries. Storefront testing reduces handling, lessens disposal and improves customer satisfaction.

Courtesy of Cadex

One of the difficulties of storefront testing has been the availability of suitable battery diagnostic equipment. The older units lacked accuracy in rapid testing, and had a predictive capacity that resembled a ticket in a Las Vegas lottery; many potential users hesitated to buy such equipment. QuickSort™ provides 90 percent accuracy across the population of cellular batteries. With a PC, some analyzers allow service reports to be printed, and the Internet enables a central manager to monitor the activity of each store. Figure 5 illustrates a battery analyzer designed for storefront use.

Cadex C5100 analyzer for lithium-ion batteries

Figure 5: Cadex C5100 analyzer for lithium-ion batteries

This analyzer rapid tests, charges and cycles batteries. The RigidArm™ adapter allows easy interface to cellular batteries; also accepts preprogrammed adapters. QuickSort™ tests batteries in 30 seconds.

Courtesy of Cadex

Maintaining Fleet Batteries

A battery analyzer assures that fleet batteries meet the minimum performance standards. The device also helps to restore low performers, if such a service is possible with the battery types in question. In addition, a battery analyzer supervises the all-important function of a timely replacement at the end of a productive life. Manufacturers of portable equipment support battery maintenance because well-performing batteries reflect positively on the equipment, a win-win situation for both manufacturer and user.

Many battery analyzers come with PC application software. With BatteryShop™(by Cadex), for example, the PC becomes the command center and all functions are processed through the keyboard, as well as other input devices. Clicking the mouse on any of the 2,000 batteries listed in the database configures the analyzer to the correct setting, eliminating the need for further programming. The user has the liberty to add, remove and edit the batteries listed should the specification change.

Labeling each fleet battery with a permanent ID number simplifies logistics and traceability. A printer connected to PC BatteryShop™ generates these labels in bar code format. The user simply scans the label, which in turn configures the analyzer and retrieves the performance history for review. Besides capacity readings and service dates, purchasing date, vendor information and pricing can also be entered. Figure 6 illustrates the battery scan, service and data examination.

Fleet battery management



Figure 6:
Fleet battery management

Labeling each battery with a unique number simplifies battery service. Swiping the barcode label reveals the history of the battery.

Courtesy of Cadex


Another tracking method for fleet batteries is attaching a removable label that shows the battery information at a glance between services, as illustrated in Figure 7. The system is self-governing in that all batteries must regularly be serviced as part of quality control. This is made possible by providing a time period between the last service and the new date due. With this information on hand, the prudent battery user only picks a battery that has been serviced and meets this quality assurance (QA) test protocol. Setting up the maintenance system is simple and managing it requires only about 30 minutes per day.

Sample of removable battery label

Figure 7: Sample of removable battery label

The label shows battery information at a glance and includes name of organization for traceability, capacity in percent, as well as past and future service dates.

Setting up a battery maintenance system requires a battery analyzer that is capable of printing battery stick-on labels. The analyzer should also offer a program that automatically restores nickel-based batteries if the set capacity threshold cannot be met. Cadex analyzers meet these requirements and go one step further by offering adjustable capacity target settings to select the minimum performance criteria for the given operation.

Most fleet operations use 80 percent as their battery pass/fail criterion. Increasing the threshold to 85 percent tightens the performance tolerance but passes fewer batteries; lowering the settings extends service life but offers less stringent performance standards. When choosing the setting, the organization must ensure that the lowest-level battery in the fleet is able to fulfill its assigned duty. Figures 8, 9 and 10 illustrate the battery label system.

Rechargeable batteries do not die suddenly but gradually get weaker with time. A service every one to three months offers plenty of confidence that all batteries will meet the minimum required capacity and last through the shift with some energy to spare.

Sorting batteries for servicing


Figure 8:
Sorting batteries for servicing

When taking a battery from the charger, the user checks the service date, and if expired the battery is placed in the “To be serviced” box.


Servicing expired batteries

Figure 9:
Servicing expired batteries

The analyzers service the batteries and recondition them if low in capacity (only nickel-based batteries receive recondition). Passing batteries are relabeled showing capacity and the next service date.


Reinstating batteries


Figure 10:
Reinstating batteries

The failed batteries are removed from service and replaced with new packs. The new and serviced batteries go back into service by being charged.

All figures Courtesy of Cadex

Battery Test Systems

While battery analyzers are tools to service batteries; battery test systems provide multi-purpose test functions for research laboratories. Typical applications are life cycle testing and verifying cell balance in field imitation. Such tests can often be automated with a custom program. Load capture allows storing load signatures for playback simulations. Many battery test systems also control external load units and environmental chambers. Other uses of such systems are quality inspections and verifying warranty claims. Figure 11 illustrates a typical battery test system.

Cadex C8000 Battery Test System

Figure 11:
Cadex C8000 Battery Test System

Four independent channels provide up to 10A each and 36V. Maximum charge power is 400W, discharge is 320W. The discharge power can be enhanced with external load banks.

Courtesy of Cadex

The alternate to a battery test system is a programmable power supply controlled by a computer. Such a platform offers flexibility but requires careful programming to prevent stress to the battery and possible damage or fire if an anomaly were to occur. A battery test system, such as the Cadex C8000, offers protected charge and discharge programs that identify a faulty battery and terminate a service safely. The system can be overridden to do destructive tests.

Simple Guidelines to Choosing a Battery Test System

*** Please Read Regarding Comments ***

Comments are intended for "commenting," an open discussion amongst site visitors. Battery University monitors the comments and understands the importance of expressing perspectives and opinions in a shared forum. However, all communication must be done with the use of appropriate language and the avoidance of spam and discrimination.

If you have a question, require further information, have a suggestion or would like to report an error, use the "contact us" form or email us at: While we make all efforts to answer your questions accurately, we cannot guarantee results. Neither can we take responsibility for any damages or injuries that may result as a consequence of the information provided. Please accept our advice as a free public support rather than an engineering or professional service.


On May 5, 2011 at 11:26pm
shakti rayka wrote:

Please send me all the equipment rates 09882326020

On July 6, 2011 at 11:01pm
Iberedeem Inim wrote:

Please send me your laptop and cell phone battery Test and Service Equipment.
Im interested in commercial deployment of same. thanks

On September 26, 2011 at 6:50pm
Cadex C8000 Advanced Progammable Battery Testing S wrote:

Need Price Quotation for the above item

On December 3, 2011 at 12:45pm
Dr. Akinfenwa Fashanu wrote:

Please send me price quotation for the Cadex C8000 and its relevant accessories.

On April 13, 2012 at 7:43am
Balaji wrote:

Please send me new equipment details and rates.

On April 19, 2012 at 5:47am
Iberedem wrote:

Kindly send me list prices for Cadex C5100 analyzer for lithium-ion batteries, Fleet battery management, Cadex C8000 Battery Test System. Urgently requires them. Thanks

On May 28, 2012 at 7:06am
Moath Makahleh wrote:

Please send me price quotation for the Cadex C8000 and its relevant accessories

On June 1, 2012 at 8:49pm
Firas wrote:

We have an inspection team for various electronic devices like mobile phone / MID (Tablet) / Speaker…etc. we want to get an instrument which allows us to test battery quality / mAh. plz advice the model and price.

On September 10, 2012 at 3:32pm
Shamsul Haque wrote:

We would like to buy lead acid battery tasting equipments , quality control systems , battery maintained instruments . pls let us know details of your activity .

On October 21, 2012 at 7:41am
mak wrote:

pls send me complete price list regarding your all kind products for battery rechargable with all kind activity detail,waiting for your positive reply ?.......................mak.

On October 31, 2012 at 2:26pm
Richard Jesch wrote:

I am interested in your products but These limitations are preventing me from moving forward:
1.)My Battery is 13 series cells Li-ion-polymer (Kokam cells) and your max is 36V
2.)We want to discharge at 1C which is about 100 Watts, out of your range
Please point out to me if I am missing this product in your line.

On November 24, 2012 at 1:17am

pl send price list CADAX   C8000 with relevant details

On November 24, 2012 at 2:57am
james mulenga wrote:



On January 21, 2013 at 8:03pm
Shamsul Haque wrote:

Dear Sir / Madam ,
                    I would like to purchase latest method eqyuipments for analysis a big volume lead acid battery factory . we are seeking battery life cycle taster , plate taster , vibrator , spectrometer , xrf analyzer etc . 

On March 9, 2013 at 8:43am
Kamran Latif Qureshi wrote:

Please send me a quotation for a battery analyzing system to test BLN4, BLN5 and Macom series batteries. We want to test atleast 32 batteries in each time. The system should be capable to scan the barcode and print the battery test results on labels.

On June 26, 2013 at 11:06pm
sharvan kumar wrote:


On June 26, 2013 at 11:08pm
sharvan kumar wrote:



On November 3, 2013 at 10:19pm
faiyaz wrote:

RigidArmâ„¢ for cellular batteries .Need Price Quotation for this item

On November 4, 2013 at 1:56am
Parimal Chouhary wrote:

We need the detailed quotation for the equipment mentioned above with the terms & conditions.
We need the detailed charging graph & discharging graphs for 12V,100AH all different types of batteries.
We are looking the test equipments which can give the result trajectory for all differnt types of batteries

On May 24, 2014 at 7:54pm
Tangs wrote:

Please send me the price list of your Battery Testing Equipments with more than two channels(such as Cadex C8000). Thanks

On July 1, 2014 at 2:01am
Betglu wrote:

Please send me the price list of your latest Battery analyzers,tnx.

On January 29, 2015 at 9:49am
Phillip Davenport wrote:

price list for RigidAm cellular batteries

On July 13, 2015 at 7:25pm
Omar sanda wrote:

Please send me information and equipment list to sell equipment, batteries and to service batteries

On August 26, 2015 at 10:12pm
Atif Javaid wrote:

Please send price list of Cadex C8000 Battery Test System with relevant details. Thankyou

On January 15, 2016 at 3:07am
Bekithemba wrote:

l think l am becoming more interested in your battery testing systems.

l intend to venture into the business of repairing and reconditioning dead mobile phone and laptop batteries before expanding into bigger batteries.

May you now kindly furnish me with a price and detailed information regarding the same.

Looking forward to doing business with you in the immediate future.

Best Regards

Bekithemba Chinyati

On August 29, 2018 at 12:28pm
Otto Brown wrote:

QTC manufacturer of OEM/ODM battery maintenance systems, such as Bluetooth APP 6V,12V24V for car, truck, motorbike, marine boats - monitor./ tester with earling warning of low or high battery voltage, focus on saving battery life and cost